How To Replace And Install A New Kitchen Faucet

February 14, 2011

Want to replace your kitchen faucet? It’s a job for which you could hire a plumber, or, with just a little bit of craftsman skill, it’s a project you could finish yourself.

Watch this video from the Lowe’s YouTube channel. You’ll get step-by-step instruction on how to take out an old faucet and how to install a new one. The supplies you’ll need are minimal, too.

In 3 minutes, the video covers:

• How to shut the kitchen water supply off and drain residual water from the pipes
• How to detach and remove the old kitchen faucet
• How to align the new faucet and reconnect to the water lines

There’s some good tips along the way, too, including how to make sure you don’t accidentally connect the hot water supply to the cold-water faucet.

If you’re uncomfortable working with your home’s plumbing and would like a referral to a plumber near Lincoln Park , please just ask. I’m happy to help how I can.

Cutting winter energy costs

January 18, 2011

Here are some great suggestions from http://www.hwahomewarranty.com.

Save Energy This Winter
11 Ways to Cut Energy Costs in 2011

1. Turn down the dial.
Set your thermostat to 68 degrees. With each degree you lower, you can save 2-5% on heating costs. Layer warm weather clothing while at home and you won’t even notice the difference. At night or when leaving the home for an extended period of time, lower the thermostat to 55-60 degrees. An automatic thermostat will make this even easier! Just program the temperatures based on your daily schedule. Doing this will knock off 5-20% on your heating bill.

2. Don’t overreact to a cold home.
When you come home after a day of work to a frigid home, or are home in the middle of the day when your thermostat is programmed to 55, don’t overreact and crank the heat up to 75. You only need to heat to 68 degrees and setting the thermostat to 75 won’t heat the home any faster than if it’s set to 68. If you are home before the furnace has turned on, you can simply override your thermostat to 68. Be patient and throw on a sweater. You may not realize when the thermostat reaches 68, and before you know it you’ve been heating your house at 7 degrees higher than you need – or want – to pay for!

3. A clean furnace is an efficient furnace.
Replace or clean furnace filters once a month. Dirty filters restrict air flow and increase energy use.

4. Hot water can still be hot and save you money!
Set your water heater to the normal setting or 120 degrees. You can save up to 11% on heating costs!

5. Go green with ENERGY STAR®.
Consider replacing old gas appliances with ENERGY STAR® qualified products or add HWA’s GreenPlus to your plan. If your appliances are more than 12 years old, you should consider the upgrade. The Consumer Energy Center recommends replacing your old gas appliances with ENERGY STAR® qualified products. Gas water heaters are labeled with an EF number the higher the EF, the more energy efficient the appliance will be.

6. Beat the cold weather dryness.
Use a humidifier to add moisture to the dry winter air in your home. Moister air feels warmer, so by using a humidifier, you will be more comfortable in your home even when the thermostat is set to a lower temperature.

7. If you don’t use it, don’t heat it.
Close off unused rooms such as spare bedrooms. When the room is not in use, close the floor or wall registers and keep the doors closed. If you have guests coming to visit, you can re-open everything and the room will warm up in just a couple hours.

8. Let the sunshine in.
Open south or east facing window curtains and blinds in the morning and during the day to take advantage of sunny days. At night, close window coverings to keep the heat in.

9. Let your radiators and heating vents do their job.
Don’t block your radiators or vents with furniture or draperies. Keep them free of dirt and dust and position your furniture so the heat can fill the room.

10. Cold water can do it better.
Cold water does more for your disposal. Run cold water when you are using your garbage disposal and it will work even better. Hot water uses energy to warm the water. Cold water saves energy, plus it solidifies grease, moving it more easily through the garbage disposal and pipes.

11. Cook small.
Prepare meals with small appliances rather than firing up the range. A microwave, toaster oven, electric skillet and slow cooker use much less energy than the range. Plus, the smaller appliances heat up much quicker. You can reduce cooking energy by as much as 80% when using your microwave for small portions. So when you’re preparing smaller recipes or just need a quick warm-up, the smaller appliances are perfect!

Rid Your Kitchen Of Hidden Dirt And Grime

September 27, 2010

A kitchen is often a home’s busiest room — a meeting place for meals and conversation. It’s also among the home’s most grimy rooms. Bacteria, dirt and germs collect on floors, on countertops, and inside appliances.

In this 4-minute clip from NBC’s The Today Show, you’ll learn how to rid your kitchen of “nastiness”.  The featured fixes use nothing but basic household cleansers and elbow grease, and they include:

• How to clean and restore wooden cutting boards and bowls
• How to remove “burn stains” from the side of a frying pan
• How to eliminate pervasive dishwasher odors

The segment also tackles why you should choose loofah over sponge, and how to catch fruit flies.

For as much time as you spend in your kitchen, it’s best to keep it clean and sanitized.

White Distilled Vinegar : An Environmentally-Friendly Home Cleaning Solution

September 13, 2010

Supermarket aisles in the Chicago area are filled with specialty cleansers — some for the kitchen, some for the bathroom, some for the carpets. Loaded with chemicals, these cleansers can be tough on the environment and costly, too.

If you’re in search of an alternative, consider white distilled vinegar.  It’s inexpensive, safe to store, and highly effective as a household cleanser.

White vinegar’s strength comes from its acidity, roughly 8%. It’s acidity kills most mold, germs, and bacteria, and can remove minerals deposits from coffee makers and glass surfaces.

Some uses for white distilled vinegar include:

• Cleaning the garbage disposal : 1/2 cup hot white distilled vinegar + 1/2 cup baking soda. Pour down drain and let sit for 5 minutes. Run hot water to flush it.
• Removing lunch box odors : Soak bread slice in white distilled vinegar. Place it in lunch box overnight.
• Remove dark spots on aluminum pots : Mix 1 cup white distilled vinegar + 1 cup hot water.  Boil in pot.
• Brighten carpets : Mix solution of 1 cup white distilled vinegar + 1 gallon water. Test on inconspicuous area first.
• Remove water rings from wood : Mix solution of 1/4 cup white distilled vinegar + 1/4 cup vegetable oil. Rub with the grain.

White distilled vinegar is extremely versatile, but it can strip finish from counter-tops and floors if left to soak. Be sure to exercise care, therefore, when using vinegar at home.

How To Change A Showerhead

September 7, 2010

There’s plenty of reasons to want to change a showerhead in your head. Perhaps you’re trying to fix a leak in the faucet; or, remodeling your bathroom; or, trying to conserve water via a low-flow showerhead. 

Whatever the reason, changing a showerhead can be a basic do-it-yourself project. The tools aren’t complicated and the job is a quick one.

In this 2-minute video from AOL, you’ll learn:

• What tools you’ll need to change the showerhead
• How to remove your old showerhead
• How to firmly attach your new showerhead to prevent leaks

If you get stuck, or just want to outsource, call a professional handyman to finish the job. Changing a showerhead should take less than a hour to complete.

How To Reduce Home Energy Costs By Sealing Air Leaks

August 30, 2010

With Labor Day looming, the autumn and winter months aren’t far behind. It’s a good time to reflect on your home’s heating and cooling costs, and take steps to lower your energy bills. Finding air leaks may be a perfect first project.

According to the U.S. Department of Energy, up to 30 percent can be cut from a home’s energy costs just by reducing drafts. For example, a 1/16-inch gap unsealed gap around a window is equivalent to leaving the window 3 inches open. 

That’s a lot of wasted Chicago air.

The good news is that air leaks are rather simple to identify, and simple to fix. The key is to know where to look. And, to make the job easier, the government offers a complete DIY Guide To Sealing and Insulating a home.

Some of the key tips include:

• Focus on the attic and basement, where most air is lost
• Locate problem areas on a chimney
• Check recessed lights which allow air flow between conditioned and unconditioned air

The government’s website also provides a 13-page PDF with detailed images, instructions, and recommendation to help you with the work.

However, if the job is beyond your skill set, be sure to call a qualified contractor. Sealing your home from air leaks will reduce your monthly energy bill and the money spent to pay a professional will be just a fraction of what you’ll save over time.

(Image courtesy: US Department of Energy)

How To Re-Grout And Caulk Bathroom Tiles

August 23, 2010

Over time, the grout in a shower can become dirty and discolored, and start to separate from its grout lines. This is a potentially dangerous condition for a home because broken grout lines allow water to seep into the walls, which can then lead to the growth of mold spores.

Fortunately, keeping your grout in tip-top shape is simple.

In this 2-minute video, you’ll learn how to clean the existing grout in your shower and to prepare for a new coating. You’ll also learn how to replace its caulk.

The video’s tips include:

• Why you should remove excess grout diagonally with a sponge
• How to protect your tub from damage while the re-grout is in process
• Choosing the right caulk for the job

The North American Tile Cleaning Association also offers helpful grout-cleaning advice. Visit their website at http://www.tilecleaning.org.

How To Unclog A Sink That Won’t Respond To Drano

August 16, 2010

Sometimes, a backed-up sink is too big of a job for a bottle of Drano. To clear the clog, you have to get your hands dirty. But what do you do?  This quick, 2-minute video from Lowe’s is an excellent tutorial.

The video starts with basic safety preparation, then shows you how to:

1. How to identify the J-trap beneath your sink
2. Position a plastic bucket to catch water run-off
3. Use your finger to clear out debris
4. Replace the J-trap beneath the sink

Unclogging a sink can be simple homeowner project, but if you’re uncomfortable working with plumbing or just want to outsource, be sure to call a professional.

How To Install A Ceiling Fan In Your Home

July 12, 2010

Up to 50% of your home’s energy bill can be tied to heating and cooling costs.  Thankfully, it’s easy to lower those bills. The addition of a ceiling fan can cut your household energy bills dramatically.

Plus, the installation may be simpler than you think.

In this 4-minute video from the Lowe’s YouTube collection, you’ll learn how to measure, mount and install a ceiling fan, step-by-step:

1. Choose the right-sized fan for your room based on its “longest wall”
2. Cut the power to your room, and test that the power is off
3. Assemble a ceiling fan
4. Secure a ceiling fan motor to the ceiling
5. Restore power to the room

If you’re uncomfortable around electricity, or feel the video’s instructions are “too complicated”, by all means, call an electrician. The money you spend on installation will be dwarfed by what you save in energy bills.

For an electrician referral in Chicago , reach out to me anytime by phone or email. I am happy to help you.

How To Mount And Install Carbon Monoxide Detectors In Your Home

June 7, 2010

Carbon monoxide (CO) is an odorless, colorless gas found in combustion fumes, stoves, gas ranges and heating systems.  It’s poisonous to humans because carbon monoxide binds to red blood cells, preventing the flow of oxygen through a person’s bloodstream.

There’s a bevy of CO sources in the home and that may be why more than 20,000 Americans are sent to the emergency room each year because of Carbon Monoxide poisoning. 5 percent die from it.

Therefore, whether you own a home in Chicago or rent one, equip your place with working carbon monoxide detectors and test them regularly. In this 2-minute video from Lowe’s, you’ll learn how to get started:

1. How to mount CO detectors using basic household tools
2. In what rooms to install CO detectors for maximum safety
3. How often CO detector batteries should be changed

Carbon monoxide poisoning is a four-season danger at home. Protect your yourself and your loved ones.

Next Page »